Aluminium cnc router routing engraving machine milling machining 3D pcb wood carving engrave


		HOTLINE: Mo.-Fr. von 8.00-12.00 u. 14.00-17.00 Uhr Tel.: +49 (0)2831/133236 Consultation and service to our CNC milling maschines/CNC milling cutter
		www.cnc-step.com

			we provide for movement

CNC milling`s tratment of soft and hard aluminum

Round engrave in solid aluminium

Because of the free of backlash, special mechanic and spindle components adapted by our company it is also possible to round- mill in thick aluminium tight fitting ( H8 ) with the High-Z series!! Here’s the video!


		AT

HU

NL

CH

	IR

ZA

FR


	Our worldwide distributors:


	ES


	US


	BG


	TW

		UK

		LU


	We’re the official sponsor of:


	We are looking for partners for baltic countries and Japan etc. Click here.

	Milling work in aluminium founding


	We want to demonstrate the producing of a form in a special aluminium founding material which is so special because it is open- pored and very solid. Video


	Milling work in solid aluminum




	Milling with a 4mm drill and milling completely video



	Mill a spoked wheel with a diameter of 90mm and


			All design for the following processing step are



			15mm depth (thickness). To the demo we have unfortunately only in


	developed with Corel Draw 7 . Let’s go.....



	substantially thicker raw material for the order had


	Completely pre-roughed


	Completely pre-roughed to the comparison here also smoothed bearing sureface


	Milling work in aluminum/front plates




		Video front plates mill aluminum 2,5mm centralhard aluminum without cooling





	Video Fmilling in soft aluminum plates with spray cooling


	During the tratment of dryings of soft aluminum one gets usually no good results are abtained with the application of spray plant.




	Were milled with a 2,5mm double cutter and 3mm/sec. feed motion.




	The result: Clean lips, wich do not have to be deburred nearly no more


	Video: millinga front plate in 3mm anodized aluminium, only the roughing down round. We advice to use an Emery cloth with a half feed motion for very neat openings.


	Milling work in aluminum/substantial treatment with double cutters




	Mill clamped in aluminum in a heavy vice




	Mill clamped in aluminum in the heavy vice part of 2




	Rough-mill with burin. Areas 2mm deeply in a processing step with 500mm/min


	Photos und videos about 3D- treatment in aluminium


		We worked with a 3mm radius router, 5mm depth of cut, 1mm roughing


	After using an Emery cloth with 0,5mm the sculpture looked nearly polished........


	This is the direct way to the rotary axle tool ( more pictures and videos )


		Milling a thread with our High-Z S-720 / turn table RounDINO 120

		You can mill a thread with the turntable RounDINO 120. For that you only need a stylus of 60° head square (pictures will follow), approx. 0,2-0,5mm writing breadth, depended on diameter and gradient of the thread.


	Round groove or. spiral groove milling with our High-Z S-720 / turntable RounDINO 120


		Milling of spiral groove in aluminium. 3mm router, respective depth of milling 2,5mm


	Last operation round. This way you can produce fastener for example.


	Depth 7,5mm. Gradient 15mm


	That’s the direct way to the miling machine prices etc.


	CNC STEP offers you a mill, a portal mill, a portal milling machine. For example with 4 or 5 channel controlling. You can mill, engrave, cut, posit